Solution to Water Leakage of Electroplating Filter Pump

The electroplating Filter Pump is chemical filtration equipment often used in the electroplating industry.

This equipment uses a corrosion-resistant chemical pump as the core drive. The shell uses chemical filtration units of different materials, which is very suitable for use in the electroplating industry.

So what should I do if the Electroplating Filter Pump leaks? The following DUBAO tells you the solution.

1. The upper cover gasket is aging, loses elasticity, or breaks.

    Solution: Replace with a new upper cover seal.

2. The cylinder is deformed into an oval shape.

    Solution: Slight water leakage; correct the upper cover and lock the handle. In severe cases, the filter cartridge needs to be replaced.

3. The handle is not tightened, and the pressure is too high.

    Solution: lock the handle. It is recommended to wash the filter element frequently to avoid the filter being under high pressure for a long time.

4. There are debris or cracks and scratches on the sealing contact surface.

    Remove the sundries on the contact surface between the gasket and the barrel. It would help if you scraped slight cracks after repairing and welding, and if serious ones need to be returned to the factory, you should replace the filter cartridge. If there are scratches, use a razor blade to smooth them out.

If this article can help you solve the problem of electroplating filter pump, we will be very happy, if you need our help, please feel free to contact us.