Polypropylene plastic filter

Update time : 2023-02-14 15:38:31

Technical parameters of polypropylene plastic filter:

1. The filter is cast by polypropylene PP material, with no internal dead Angle, burr, product casting fine, pressure 1.0Mpa.

2. Filter element is filter bag, filtering accuracy can reach 0.5 micron.

3. The general operating temperature of polypropylene plastic filter can reach 80 degrees, and the modified material can reach 150 degrees.

4. The top-in design has many advantages, such as reasonable structure, good sealing, strong circulation ability and simple operation. Especially the filter bag side leakage probability is small, can correctly ensure the filtration accuracy, and can quickly change the filter bag, so that the operation cost is reduced.

5.. The shell, filter screen and filter bag are made of polypropylene. Excellent anti-corrosion effect.

6. Polypropylene plastic filter filter element for filter bag, filter bag material polypropylene PP, polyethylene PE, polyamide (PA, commonly known as nylon), tetrafluoro{PTFE), etc. Filter bag specification is ¢180*810mm.

7. Polypropylene plastic filter connection mode is flange connection, connection standard HG20592-09-PN10-RF.

8. The top cover is leak-proof design, effectively eliminate side leakage, no leakage; The filter bag has a handle design, easy to replace the filter material.

Polypropylene plastic filter is a kind of novel structure, small size, simple and flexible operation, energy saving, high efficiency, airtight work, strong applicability of multi-purpose filter equipment, the filter is supported by plastic mesh bag inside the filter, liquid flow into the inlet, filtered by the filter bag from the outlet, impurities are intercepted in the filter bag. The filter bag can be replaced or cleaned to continue to use. The machine is simple to operate, only need to install the filter bag of required fineness grade in the filter cylinder, check whether the O-ring seal is intact, and then screw the cover, tighten the bolt, you can be put into work.

Application scope of PP plastic filter:

With excellent properties of acid and alkali resistance, it is widely used in the production of pharmaceutical intermediates. Paint, beer, vegetable oil, medicine, chemicals, petroleum products, textile chemicals, photosensitive chemicals, electroplating solution, milk, mineral water, hot solvent, latex, industrial water, sugar water, resin, ink, industrial wastewater, fruit juice, edible structure is reasonable, more stable filtration,

Previous : Structure and principle of corrosion resistant filter

Next : The working principle of bag filter

What is a basket filter and how does it work?

Oct .19.2024

Basket filter is a commonly used filtration equipment, which is mainly used to remove impurities and suspended matter of larger particles in the liquid to protect the normal operation of downstream equipment and systems

How to improve the operation efficiency of chemical magnetic pump?

Oct .19.2024

Improving the operational efficiency of chemical magnetic pumps can be achieved through a variety of measures, from optimizing operating conditions to regular maintenance, which can effectively improve the overall performance of the pump

What is the maintenance method of plastic magnetic pump?

Sep .02.2024

The maintenance of plastic magnetic pumps is essential to extend their service life and ensure safe operation. The following are the common maintenance methods of plastic magnetic pump

What is the working principle of plastic magnetic pump?

Sep .02.2024

The working principle of plastic magnetic pump is based on magnetic drive and non-leakage structure, mainly including the following key steps

Cathy Jack

Cathy

Bruce Lee

Leave a message

Language

Language

Polypropylene plastic filter